WB FR PL 840 Series Standard for Plaster

The WB-FR Standard Fire Rated Access Door with a plaster bead trim for use in plaster walls and ceilings. Accommodates 3/4" of plaster.

Construction Specifications:
Door: 18 ga. steel
Frame: 16 ga. steel, 2 1/2 deep, with 3" wide perforated flange of 24 ga. galvanized material. Space from expanded flange to the 1/4" safety edge of the door will accommodate 3/4" of plaster
Insulation: 2" thick mineral wool (THERMAFIBER®)
Hinge: Fully concealed, pivot-rod type hinge allows opening to 140º
Latches: Self-latching direct action latch will accept both key and knurled knob
Automatic Panel Closer: Vertical position only. Ceiling position has self-assisted closing
Inside Panel Release: Furnished on all doors
Ceiling Installation: To comply with current fire regulation, largest size acceptable is up to and including 24" x 36"
Finish: Grey baked enamel coat and can be used as a finish or as a prime coat
Options: (AT EXTRA COST) + Stainless Steel Type 304 and Type 316 No. 4 Satin Finish brushed and non-brushed
+ Stainless Steel "B" label door
+ Mortise Best Lock (or locks supplied by others)
+ Ultra Lock available
+ Hot Smoke Seal gasketing for 4 sides**
+ Special sizes available

WB FR PL 840 Series Standard for Plaster Fire-Rated Access Door

 



Model No. Door Size Wall Opening Slam Catch Shipping Wt Lbs. Cad File
FR PL 840 12 x 12 121/4 x 121/4 1 12
FR PL 840 14 x 14 141/4 x 141/4 1 15
FR PL 840 16 x 16 161/4 x 161/4 1 18
FR PL 840 18 x 18 181/4 x 181/4 1 21
FR PL 840 24 x 24 241/4 x 241/4 1 32